排序方式: 共有38条查询结果,搜索用时 15 毫秒
21.
22.
运输问题一般采用表上作业法来解决,考虑一类带配送中心的运输问题,若仍采用表上作业法,会使问题复杂化.文中采用一种构造辅助网络的方法:在运输网络中将每个配送中心均拆分成两个点,连接两点形成新弧,构造出新的网络,并给每条弧赋予参数,将此类运输问题转换为最小费用流模型来解决,可以使问题模型和运算简单化.在此基础上,考虑运输网络中配送中心和边的容量扩张问题. 相似文献
23.
张君霞 《后勤工程学院学报》2005,21(3):66-68,72
采用变分累积展开方法,研究了块体磁性合金的相图.利用随机键海森堡模型计算了面心立方、体心立方的居里点和耐尔点,给出了磁性合金临界点的计算公式,进而分别给出自旋1/2和3/2情况下Tc-x相图,并加以分析. 相似文献
24.
针对圆柱形隔离段-燃烧室构型的旋转爆震冲压发动机,开展了总温为860 K、马赫数为2的来流条件下的直连式试验,探讨了燃烧室前缘扩张角(θ=30°,45°,60°,90°)对爆震波传播特性、工况范围及压力分布的影响。结果表明:当燃烧室前缘扩张角为90°时,燃烧模态均为爆燃燃烧;随着扩张角的减小,燃烧模态将会向锯齿波和混合模态(包含单波阶段)转换。当燃烧室前缘扩张角为30°时,旋转爆震的自持工况范围最宽且燃烧室压力最高;同时,随着燃烧室前缘扩张角减小,实现混合模态的当量比下限降低。此外,分析了燃烧模态对来流的影响,发现:锯齿波/混合模态燃烧室内存在的周期性高频压力扰动会使隔离段内的激波串位置前移;混合模态对超声速来流的影响最为显著。 相似文献
25.
《防务技术》2022,18(9):1622-1642
Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement. 相似文献
26.
基于水下应用栅格翼动态展开过程动力学模型,根据展开特征角度定常水动力方法,拟合获得展开全程受到的流体力矩,并引入考虑相对速度影响的修正因子,形成水下应用栅格翼动态展开过程参数工程预示方法,以典型展开时序点航行体运动参数为设计输入,对栅格翼展开过程运动参数进行预示。通过与水下应用栅格翼非定常流场仿真计算数据以及水下航行体弹射试验数据对比,验证了上述预示方法的正确性及工程适用性,为水下应用栅格翼方案设计的优化及展开不同步性分析提供设计参考。 相似文献
27.
针对舰用锅炉换热管与管板胀接结构可靠性,分析了影响胀接的主要因素,运用弹性理论对胀接结构进行了理论分析,并首次对舰用锅炉应用双轴承后退式胀管器进行管子与管板试件的胀接试验研究,推导出适合机械式胀接的胀管率近似理论计算方法. 相似文献
28.
王胜兵 《海军工程大学学报》1992,(4)
本文通过正则坐标变换,把光滑域上的有限元解的误差估计转化为正六边形域上6PC剖分下的误差估计。在适当的条件下给出了三角形线元解的渐近展开式(u—u_h)(z)=c(u)h~2+o(h~3|lnh|)及外推估计式‖u-u_h‖_(0,2,M~h)=o(h~3|lnh|)。 相似文献
29.
动态二进制翻译在实现多源到多目标的程序翻译过程中,为屏蔽不同源平台间的硬件差异引入中间代码,采用内存虚拟策略进行实现,但同时带来中间代码膨胀问题。传统的中间代码优化方法主要采用对冗余指令进行匹配删除的方法。将优化重点聚焦在针对特殊指令匹配的中间表示规则替换上,提出了一种基于中间表示规则替换的二进制翻译中间代码优化方法。该方法针对中间代码膨胀所呈现的几种典型情景,描述了中间表示替换规则,并将以往应用在后端代码优化上的寄存器直接映射策略应用在此处。通过建立映射公式,实现了将原来的内存虚拟操作替换为本地寄存器操作,从而降低了中间代码膨胀率。使用SPEC CPU2006测试集进行了实验,验证了此优化方法的正确性和有效性。测试用例在优化前和优化后的执行结果一致,验证了优化方法的正确性;优化后测试用例的中间代码平均缩减率达到32.59%,验证了优化方法的有效性。 相似文献
30.
针对边区液膜冷却型小推力液体火箭发动机,引入VOF模型模拟冷却液膜,使用数值仿真手段计算了发动机推力室突扩构型对燃烧效率与传热特性的影响.对比可见计算结果是可靠的,计算表明无量纲台阶高度H*从0.111增加到0.222,燃烧效率增加0.35个百分点、燃烧效率随无量纲台阶长度L*增加变化较小、另外传热特性受H*与L*的影响都不大.这表明在扩张型推力室中,燃烧效率下降的主要原因是壁面附近的气态MMH无法与氧化剂有效混合. 相似文献